Nagole, Hyderabad, Telangana

GST No. 36AAOCA4431C1ZY

Send Email

Call 0804296813680% Response Rate

Home

About Us

Products & Services

Contact Us

Home » Products & Services » DAQ DATA ACQUISITION BOARDS

DAQ DATA ACQUISITION BOARDS

Our range of products include precision data loggers, thermocouple data logger, drdaq data loggers, cm3 current data logger, picolog 1000 series data loggers and platinum resistance data logger.

Precision Data Loggers

REQUEST CALLBACK

Get Best Quote

Approx. Rs 59,600 / UnitGet Latest Price

Product Details:

Parameter to be Monitored	Temperature
Type of Data Logger	Digital Data Logger
No. of Channels	Single Channel
For Quoted Accuracy	20 degreeC to 30 degreeC
General Operation	0 degreeC to 45 degreeC
Relative Humidity	5% to 80% RH
Dimensions	135 x 184 x 36 mm (5.31 x 7.24 x 1.41 in)

We are offering a wide range of Precision Data Loggers. Multichannel data loggers offering high resolution, high accuracy, and programmable input ranges.

High-resolution data acquisition:

24-bit resolution
Up to 8 true differential inputs
Up to 16 single-ended inputs
7 input ranges (±39 mV to ±2500 mV)
Fast conversion time
Digital outputs for control
Galvanic isolation from the PC to eliminate noise pickup
PicoLog data acquisition software included
Software drivers and SDK included

Specifications:

	ADC-20	ADC-24
Resolution	20 bits	24 bits
Number of channels#	4 differential / 8 single-ended	8 differential / 16 single-ended
Conversion time (per channel)	660 ms, 340 ms, 180 ms, 100 ms, 60 ms
Voltage ranges	±2500 mV ±1250 mV	±2500 mV ±1250 mV ±625 mV ±312 mV ±156 mV ±78 mV ±39 mV
Accuracy	0.002	0.1% (±39 mV to 1250 mV range) 0.2% (±2500 mV range)
Noise rejection	120 dB typical at 50/60 Hz
Input impedance	Differential: 2 MΩ Single-ended: 1 MΩ
Common mode input range, channel to common	±1.9 V (±39 mV to ±1250 mV ranges) ±3.0 V (±2500 mV range)
Common mode input range, common to earth ground	±30 V
Common mode rejection ratio, channel to common	95 dB (DC to 60 Hz)
Common mode rejection ratio, common to earth ground	> 125 dB (DC to 60 Hz)
Overvoltage protection	±30 V
Digital I/O	none	4 bidirectional (3.3 V CMOS)
Reference output	+2.5 V ±2.5 mV @ 2 mA +5 V ±1.0 V @ 2 mA –5 V ±1.5 V @ 2 mA

PC requirements
Minimum	Processor: 1 GHz. Memory: 512 MB. Free disk space: 32-bit: 600 MB, 64-bit: 1.5 GB. Operating system: 32-bit or 64-bit edition of Microsoft Windows 7, Windows 8 or 10. Ports: USB 1.1.
Recommended	Processor: 1 GHz. Memory: 512 MB. Free disk space: 32-bit: 850 MB, 64-bit: 2 GB. Operating system: 32-bit or 64-bit edition of Microsoft Windows 7, 8 or 10. Ports: USB 1.1 or higher.

Yes! I am Interested

Thermocouple Data Logger

REQUEST CALLBACK

Get Best Quote

Approx. Rs 44,000 / UnitGet Latest Price

Product Details:

Operating Temperature	0 to 50 degreeC
Operating temperature for stated accuracy	20 to 30 degreeC
Operating Humidity	5 to 80 %RH Non-condensing
Storage Humidity	5 to 95 %RH Non-condensing
Water Resistance	Not water-resistant
Dimensions	201 x 104 x 34 mm (7.91 x 4.09 x 1.34 in)

We are offering a wide range of Thermocouple Data Logger. Temperature measurement and recording with the TC-08 is very easy — simply plug the TC-08 into a USB port on your computer, plug in your thermocouples, and you are ready to go.

8 channel thermocouple data logger:

8 channel thermocouple data logger
Measures from –270 to +1820 °C (–454 to +3308 °F)
High resolution and accuracy
Expandable to 20 units / 160 channels
Supports all popular thermocouple types
Fast sampling rate — up to 10 measurements per second (including CJC)
USB connected and powered
PicoLog for Windows data logging software included
Windows, Mac OS X and Linux drivers included

Specifications:

USB TC-08 Thermocouple Data Logger general specifications
Number of channels (single unit)	8
Maximum number of channels (using up to 20 TC-08s)	160
Conversion time	100 ms per thermocouple channel + 100 ms for cold junction compensation (CJC can be disabled if all channels used as voltage inputs)
Temperature accuracy	Sum of ±0.2% of reading and ±0.5 °C
Voltage accuracy	Sum of ±0.2% of reading and ±10 µV
Overvoltage protection	±30 V
Maximum common-mode voltage	±7.5 V
Input impedance	2 MΩ
Input range (voltage)	±70 mV
Resolution	20 bits
Noise-free resolution	16.25 bits
Thermocouple types supported	B, E, J, K, N, R, S, T
Input connectors	Miniature thermocouple

PC requirements
Minimum	Processor: 1 GHz. Memory: 512 MB. Free disk space: 32–bit: 600 MB, 64–bit: 1.5 GB. Operating system: 32– or 64–bit edition of Microsoft Windows XP (SP3), Vista, Windows 7, Windows 8 (not Windows RT) or Windows 10. Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac). Ports: USB 1.1 port.
Recommended	Processor: 1 GHz. Memory: 512 MB. Free disk space: 32–bit: 850 MB, 64–bit: 2 GB. Operating system: 32– or 64–bit edition of Microsoft Windows 7, Windows 8 (not Windows RT) or Windows 10. Beta software: Linux Debian, OpenSUSE and Fedora derived distributions, OS X (Mac). Ports: USB 1.1 or higher.

Additional Information:

Item Code: TC-08

Yes! I am Interested

DrDAQ Data Loggers

REQUEST CALLBACK

Get Best Quote

Approx. Rs 3,500 / UnitGet Latest Price

Product Details:

Bandwidth	100 kHz
Resolution	8 bits
Input Characteristics	1 M Omega
Input Type	Single-ended, BNC Connector
Input Coupling	DC
Timebases	10 us/div to 5000 s/div

DrDAQ Data Loggers is a versatile instrument that connects to the USB port of any PC. Using the supplied PicoScope software it can be used as an oscilloscope, spectrum analyzer, and signal generator. Using the supplied PicoLog software it can be used as a data logger with built-in sensors for light, temperature, and sound. It can also measure voltage and resistance. In addition, it has a socket for standard pH electrodes and connectors that allow the use of optional external sensors for measuring temperature, humidity, pressure and more.

DrDAQ Features:

Oscilloscope / spectrum analyzer
Signal generator / arbitrary waveform generator
Built-in sensors for light, temperature and sound
Measure pH and redox — just plug in any standard electrode
Sockets for external sensors including temperature and humidity
4 digital inputs and outputs (alarms, PWM, pulse counting)
USB connected and powered
Supplied with PicoScope and PicoLog software
Suppied with Windows, Mac and Linux drivers
Very low cost

Specifications:

Built-in sensors/outputs
Channel	Range	Resolution	Accuracy
Sound waveform	±100	±0.2	not calibrated
Sound level	55 to 100 dBA	1 dBA	5 dBA
Temperature	-10 to +70 °C	0.1 °C @ 25 °C	2 °C @ 25 °C
Light	0 to 100	0.1	not calibrated
RGB LED	16.7 million colours	8 bit x 3	not applicable

Analog inputs
Type	Connector	Range	Resolution	Accuracy
pH	BNC	0 to 14 pH	0.02 pH	Sensor calibration dependent
Redox/ORP	BNC (shared with pH)	±2000 mV @ 1012 Ω	1.2 mV	Sensor calibration dependent
Resistance	Screw terminal	0 to 1 MΩ	250 Ω @ 10 k	0.05
External sensors	3 x FCC68 4/4	Measure 0 to 2.5 V (Also supply power to external sensors and identify sensor type via ID resistor.)	1 mV	0.01

Additional Information:

Item Code: DrDAQ

Yes! I am Interested

CM3 Current Data Logger

REQUEST CALLBACK

Get Best Quote

Approx. Rs 4,000 / UnitGet Latest Price

Product Details:

Number of Channels	3
Range (voltage input)	0 to 1 V AC RMS
RMS Noise	60 uV
Resolution	24 bit
Conversion Time per Enabled Channel	720 ms
Voltage Input	1 V RMS, 20 Hz to 1 kHz
Input Connectors	4 mm sockets
Input Impedance	Greater than1 M Omega, AC coupled

The CM3 Current Data Logger is a three-channel data logger that uses industry-standard current clamps. Simply connect to your PC via USB or Ethernet, run the supplied software and you can monitor and log current for a wide range of applications.

Suitable for single or three-phase alternating currents:

Non-invasive measurement
High resolution and accuracy
No power supply required
USB and Ethernet interfaces
Run multiple units on a single PC

Typical Applications:

Mains current monitoring
Three-phase load balancing
Long-term energy use recording
Energy and cost saving / ISO14001 monitoring

Specifications:

PC requirements
Minimum	Processor: 1 GHz Memory: 512 MiB Free disk space: 32-bit: 600 MB, 64-bit: 1.5 GB Operating system: 32- or 64-bit edition of Microsoft Windows XP (SP3), Vista, Windows 7, Windows 8.1 (not Windows RT) or Windows 10 Ports: USB 1.1 port or Ethernet.
Recommended	Processor: 1 GHz Memory: 512 MiB Free disk space: 32-bit: 850 MB, 64-bit: 2 GB Operating system: 32- or 64-bit edition of Microsoft Windows 7, Windows 8.1 (not Windows RT) or Windows 10 Ports: USB 1.1 (or higher), or Ethernet.

Environmental
Operating environment Temperature range Humidity range	0 °C to 50 °C (20 °C to 28 °C for stated accuracy) 20% to 80% RH, non-condensing
Storage environment Temperature range Humidity range	–20 °C to +60 °C 5% to 95% RH, non-condensing

Software
PicoLog for Windows	PicoLog data acquisition software can collect up to 1 million samples. Features include: Multiple views — view data as a graph, spreadsheet or text Parameter scaling — convert raw data into standard engineering units Math functions — use mathematical equations to calculate additional parameters Alarm limits — program an alert if a parameter goes out of a specified range IP networking — transfer measurements via a LAN or over the internet Operating systems supported — Microsoft Windows XP (SP3) to Windows 10. Not Windows RT.
PicoLog languages	Full support for — English, Français, Deutsch Menus and dialogs only for — Italiano, Español, Svenska
Software Development Kit	Includes example code.
Optional free software	Drivers for Linux and OS X.

Additional Information:

Item Code: CM3

Yes! I am Interested

PicoLog 1000 Series Data Loggers

REQUEST CALLBACK

Get Best Quote

Approx. Rs 4,000 / UnitGet Latest Price

Product Details:

For Quoted Accuracy	20 degree C to 50 degree C
General Operation	0 degree C to 70 degree C
Relative Humidity	5% to 80% RH
Dimensions	45 x 100 x 140 mm (1.77 x 3.94 x 5.51 in)
Weight	Less Than 200 g (7.05 oz)

We are offering a wide range of PicoLog 1000 Series Data Loggers. Designed to meet the needs of a wide range of general-purpose voltage, sensor, and transducer logging applications, the PicoLog 1000 Multichannel DAQ Series features independent software-configurable scaling and control outputs, an external terminal board for custom front-end circuitry and a choice of 10 or 12-bit input resolution.

Multichannel data acquisition (DAQ):

Up to 16 input channels per data logger
Up to 4 output channels per data logger
Use up to 4 data loggers at the same time
Up to 1 MS/s sample rate
USB connected and powered
Data acquisition software and SDK included

Specifications:

Inputs
Model	PicoLog 1012	PicoLog 1216
Maximum sampling rate Continuous streaming Real-time continuous Block mode#1	1 kS/s per channel in PicoLog, 100 kS/s shared by all channels using the supplied SDK 1 kS/s or greater 1 MS/s single-channel
Buffer memory	8000 samples, shared by all channels
Analog inputs	12#2	16#2
Analog bandwidth (–3 dB)	DC to 70 kHz
Input type	Single-ended, unipolar
Input voltage range	0 to +2.5 V
Linearity (at 25 °C)	1 LSB
Resolution	10 bits	12 bits
Accuracy	0.01	0.005
Overvoltage protection	±30 V to ground
Input coupling	DC
Input impedance	1 MΩ

Outputs
Digital output (D0…D3)	2	4#2
Digital outputs (PWM) period duty cycle	None	1 100 µs to 1800 µs Adjustable from 0% to 100% in 1% steps
Digital outputs (all) the logic low voltage the logic high voltage current limit	100 mV (typical) 3.3 V 1 kΩ resistors in series with outputs
Power output for sensors	2.5 V @ 10 mA, current-limited

Yes! I am Interested

Platinum Resistance Data Logger

REQUEST CALLBACK

Get Best Quote

Approx. Rs 59,600 / UnitGet Latest Price

Product Details:

Dimensions	184 x 135 x 36 mm (approx 5.31 x 7.24 x 1.42 in)
Weight	350 g (approx 12.3 oz)
Software Development Kit	Includes example code.
Optional Free Software	Drivers for Linux and OS X.

We are offering a wide range of Platinum Resistance Data Logger. The PT-104 is a four-channel temperature measuring data logger. It offers the ultimate in resolution (0.001 °C) and accuracy (0.015 °C). Along with temperature, it can also be used to measure resistance and voltage.

PT-104 Platinum Resistance Data Logger:

Measures temperature, resistance, and voltage
High resolution and accuracy
Works with PT100 and PT1000 sensors
Supports 2, 3 and 4-wire sensors
No power supply required
USB and Ethernet interfaces
Run multiple units on a single PC

Accuracy and resolution:
Although accurate temperature sensors are widely available, it has been difficult to take advantage of them due to errors caused by the measuring device. Your PT-104 however, is inherently accurate due to its innovative design. Rather than relying on voltage references (which tend to be temperature sensitive) it uses ‘reference’ resistors which are extremely stable (low temperature coefficient and drift). The exact value of each resistor is stored in an EEPROM to provide the ultimate in accuracy (yearly recalibration is recommended). A high-performance 24-bit ADC is used to achieve the 0.001 °C resolution.

Specifications:

Input/output
Type	Temperature	Resistance	Voltage
Sensor	PT100, PT1000	n/a	n/a
Range	–200 to +800 °C	0 to 375 Ω 0 to 10 kΩ	0 to 115 mV 0 to 2.5 V
Accuracy (at 23 ±2 °C)	0.015 °C + 0.01% of reading	20 ppm at 100 Ω	0.004
Temperature coefficient	5 ppm/°C	5 ppm/°C	100 ppm/°C
RMS noise with filter	0.01 °C	10 ppm	10 ppm
Resolution	0.001 °C	1 µΩ	0.156 µV
Overload protection	±30 V
Number of inputs	4
Converter resolution	24 bits
Conversion time	720 ms per channel
Input connectors	4-pin mini-DIN
Input impedance	>1 MΩ
Output connectors	USB and Ethernet

Additional Information:

Item Code: PT-104

Yes! I am Interested

Picoconnect Gigabit Digital Passive Test Probes

REQUEST CALLBACK

Get Best Quote

Approx. Rs 4,000 / UnitGet Latest Price

Product Details:

Dimensions (probe head)	68 x 19 x 11 mm
Nominal Probe tip Pitch	5 mm
Weight	5 g

We are offering a wide range of Picoconnect Gigabit Digital Passive Test Probes. A family of high-performance gigabit test probes allowing cost-effective fingertip browsing of broadband data streams out to 18 Gb/s. These include the now ubiquitous USB 2 & 3, HDMI 1 & 2, Ethernet, PCIe, SATA and LVDS standards.Cost-effective test and measurement solutions have struggled to keep up with the increased use of broadband digital communications, particularly in the field of low-invasive transmission line probing solutions. With less than 0.4 pF tip capacitance and ground-referred loading of 220 Ω to 910 Ω, overall the PicoConnect probes are less invasive than the majority of existing and more costly probing solutions. To achieve measurement accuracies down to a few percent they are ratio-compensated for their typical application: the probing of transmission lines and ports between 40 Ω and 100 Ω (80 Ω to 200 Ω differential).

Specifications:

Environment
Operating temperature range	0 to 50°C
Storage temperature range	–20 to 70°C
Temperature range for stated specifications	15 to 40°C
Operating humidity range	5% to 80% RH non-condensing
Storage humidity range	5% to 95% RH non-condensing
Altitude range	up to 2000 m
Pollution degree	2
Safety approvals	EN61010-031:2002+A1 2008 safety requirements for hand-held probe assemblies for electrical measurement and test
EMC approvals	Not applicable
Environmental approvals	2012/19/EU - Waste Electrical and Electronic Equipment 2011/65/EU - Restriction of use of certain Hazardous Substances in Electrical and Electronic Equipment

General
Output connector (probe head)	SMA(f
Supplied cable	60 cm SMA(m-m) precision unsleeved high-flex 085 microwave coaxial cable (unsleeved and 30 cm options also available)
Supplied accessories	Pack of replacement probe tips; two coils of solder-in gold-plated wire; SMA-to-BNC adaptor (with RF, microwave and pulse models only)

Yes! I am Interested

Looking for DAQ DATA ACQUISITION BOARDS ?