FPGA Development Boards

Approx. Rs 28,993 / PieceGet Latest Price

Galatea is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA with x1 PCIe interface and two 1Gb DDR3 SDRAM devices. This board features Xilinx XC6SLX45T (or larger) – FGG484 FPGA. Two high speed expansion connectors are available on board for the purpose of adding additional features to the board by using custom or off-the-shelf daughter boards. A rich set of off-the-shelf expansion modules are available at https://numato.com. Galatea is shipped with a dual port 100BASE-T Ethernet Module and an IO Expansion Module pre-installed.

Features:

• FPGA: Spartan-6 XC6SLX45T in -3FGG484 package (Other devices available at request)
• x1 lane PCIe Gen1 interface
• 2 x DDR3: 2Gb SDRAM MT41J128M16
• Dual Port 100BASE-T Ethernet (Daughter Board)
• IO Expansion Module (Daughter Board)
• 128 Mb QSPI flash memory (N25Q128A13ESE40E) for Configuration and optional data storage
• USB to UART serial converter
• 3 x 100MHz CMOS oscillator
• 2 x 150MHz CMOS oscillator for GTP
• 2 x GTP available on 2x SATA connectors
• MicroSD adapter for bulk data storage
• All differential pairs are length matched on the module
• Maximum 112 IOs for user defined purposes on FX18 Hirose connectors
• Can be powered from PCIe slot or from an external power supply
• JTAG and SPI headers for programming and debugging
• 44 Length matched LVDS33 differential pairs
• 12 Length matched LVDS1V5 differential pairs
• 2x SMA connectors for Clock or other signal input/output

Applications:

• Product Prototype Development
• Development and testing of custom embedded processors
• Signal Processing
• Communication devices development
• Data Acquisition
• Educational tool for Schools and Universities

Approx. Rs 11,682 / PieceGet Latest Price

We are offering FPGA Development Boards C-Mod boards combine a Xilinx CPLD, a JTAG programming port, and power supply circuits in a convenient 600-mil, 40-pin DIP package. C-Mods are ideally suited for breadboard or other prototype circuit designs where the use of small surface mount packages is impractical.

Features:

• Superlative performance
• Efficient working
• Competitive prices
• All C-MOD boards are compatible with the free Xilinx Web Pack tools
• Design can easily be ported between C-MODs using different CPLD device families
• Once programmed, CPLD designs are non-volatile
• All available user I/O signals are brought out to DIP pins
• Requires a single 3.3V supply voltage (voltage regulation on C-MOD boards where required)
• Adequate bypass capacitance on all CPLD voltage supply pins

Specifications:

Additional Information:

• Item Code: Digilent-C-Mod

Approx. Rs 35,282 / PieceGet Latest Price

• Xilinx Artix-35T FPGA:
  • 33,280 logic cells in 5200 slices (each slice contains four 6-input LUTs and 8 flip-flops)
  • 1,800 Kbits of fast block RAM
  • Five clock management tiles, each with a phase-locked loop (PLL)
  • 90 DSP slices
  • Internal clock speeds exceeding 450MHz
  • On-chip analog-to-digital converter (XADC).
  • Programmable over JTAG and Quad-SPI Flash
• System Features:
  • 256MB DDR3L with a 16-bit bus @ 667MHz
  • 16MB Quad-SPI Flash
  • USB-JTAG Programming circuitry (USB Micro cable required).
• System Connectivity:
  • 10/100 Mbps Ethernet
  • USB-UART Bridge
• Interaction and Sensory Devices
  • 4 Switches
  • 4 Buttons
  • 1 Reset Button
  • 4 LEDs
  • 4 RGB LEDs
• Expansion Connectors:
  • 4 Pmod connectors
  • Arduino/chipKIT Shield connector
• Programming
  • Includes a free licence key of Vivado Design Suite.

Approx. Rs 7,222 / PieceGet Latest Price

• Product Prototype Development
• Signal Processing
• Wired and Wireless Communications
• Educational tool for schools and universities

• FPGA: Spartan-6 XC6SLX9 in TQG144 package
• USB 2.0 interface for On-board flash programming
• FPGA configuration via JTAG and USB
• 8 LEDs and four switches for user-defined purposes
• 70 IOs for user-defined purposes
• Onboard voltage regulators for single power rail operation

Approx. Rs 32,800 / PieceGet Latest Price

The FPGA Boards is a feature-rich, ready-to-use, entry-level embedded software and digital circuit development platform built around the smallest member of the Xilinx Zynq-7000 family, the Z-7010. The Z-7010 is based on the Xilinx All Programmable System-on-Chip (AP SoC) architecture, which tightly integrates a dual-core ARM Cortex-A9 processor with Xilinx 7-series Field Programmable Gate Array (FPGA) logic. When coupled with the rich set of multimedia and connectivity peripherals available on the ZYBO, the Zynq Z-7010 can host a whole system design. The onboard memories, video and audio I/O, dual-role USB, Ethernet and SD slot will have your design up-and-ready with no additional hardware needed. Additionally, five Pmod connectors are available to put any design on an easy growth path. The ZYBO provides an ultra-low-cost alternative to the Zed Board for designers that don’t require the high-density I/O of the FMC connector but still wish to leverage the massive processing power and extensibility of the Zynq AP SoC architecture. Digilent also includes with every ZYBO purchase a Vivado Design Suite license, enabling the use of the Logic Analyser tools, accelerating debug and testing. This license is a 1 year, device-locked license, and will only work with the Z-7010 Zynq part on the ZYBO. After the license expires, any version of Vivado Design Suite that was released during this 1 year period can continue to be used indefinitely. The ZYBO is compatible with Xilinx’s new high-performance Vivado Design Suite as well as the ISE/EDK toolset. These toolsets meld FPGA logic design with embedded ARM software development into an easy to use, intuitive design flow. They can be used for designing systems of any complexity, from a complete operating system running multiple server applications in tandem, down to a simple bare-metal program that controls some LEDs. For systems that require an operating system, Digilent provides an out-of-the-box Linux solution specifically targeted to run on the ZYBO, complete with documentation describing how best to mold it to suit your purposes. These Xilinx tools and Linux solution are all available to use at no additional cost with the ZYBO.

The Z-7010 features include:

• 667 MHz dual-core Cortex-A9 processor
• DDR3 memory controller with 8 DMA channels
• High-bandwidth peripheral controllers: 1G Ethernet, USB 2.0, SDIO
• Low-bandwidth peripheral controller: SPI, UART, CAN, I2C
• Reprogrammable logic equivalent to Artix-7 FPGA
• 80 DSP slices
• On-chip dual channel, 12-bit, 1 MSPS analog-to-digital converter (XADC)

The ZYBO offers the following onboard ports and peripherals:

• ZYNQ XC7Z2010-1CLG400C
• 512MB x32 DDR3 w/ 1066Mbps bandwidth
• Dual-role (Source/Sink) HDMI port
• 16-bits per pixel VGA port
• Trimode (1Gbit/100Mbit/10Mbit) Ethernet PHY
• Micro SD slot (supports Linux file system)
• OTG USB 2.0 PHY (supports host and device)
• External EEPROM (programmed with 48-bit globally unique EUI-48/64™ compatible identifier)
• Audio codec with headphone out, microphone and line in jacks
• 128Mb Serial Flash w/ QSPI interface
• On-board JTAG programming and UART to USB converter
• GPIO: 6 push buttons, 4 slide switches, 5 LEDs
• Five Pmod connectors (1 processor-dedicated, 1 dual analog/digital)

Approx. Rs 6,903 / PieceGet Latest Price

• Product Prototype Development
• Signal Processing
• Learning Digital Electronics
• Educational tool for schools and universities

• FPGA: Spartan XC6SLX9 in CSG324 package
• (MT46H32M16LF/W949D6CBHX6E)
• USB 2.0 interface for On-board flash programming
• FPGA configuration via JTAG and USB
• 8 LEDs, Six Push Buttons and 8 way DIP switch for user-defined purposes
• VGA Connector
• Stereo Jack
• Micro SD Card Adapter
• Three Digit Seven Segment Displays
• 32 IOs for user-defined purposes
• Four 6×2 Expansion Connectors
• Onboard voltage regulators for single power rail operation

Approx. Rs 1,06,200 / PieceGet Latest Price

• FPGA: Kintex-7 XC7K160T-1 FBG676 package (Other devices available at request)
• 4 lane PCIe Gen2.0 (5GT/s) interface at maximum 2GB/s
• 4GB DDR3L SODIMM SDRAM M471B5173CB0-YK0 1600MHz
• 128 Mb QSPI flash memory (N25Q128A13ESE40E) for Configuration and optional data storage
• USB to UART serial converter
• 1 x 100MHz CMOS oscillator
• 2 x 150MHz LVDS oscillator for GTP
• Maximum 153 IOs for user-defined purposes on FMC connector
• Onboard voltage regulators for single power rail operation
• Can be powered from PCIe slot or from an external power supply
• JTAG header for programming and debugging
• All differential pairs are length matched on the board
• 1 RGB LED for custom use

Applications:

• Parallel processing and accelerators
• Development and testing of custom embedded processors
• Signal Processing
• Communication devises development
• Data Acquisition
• Educational tool for Schools and Universities

Nereid is easy to use FPGA Development Board featuring Xilinx Kintex-7 FPGA with x4 PCIe interface and 4GB DDR3 SDRAM. This board features Xilinx XC7K160T– FBG676 FPGA. Other FPGA configurations are available upon request.

Approx. Rs 32,000 / PieceGet Latest Price

• FPGA: XC7K70T in FBG484 package, Speed Grade: 1
• DDR3: 2Gb DDR3 (MT41J128M16HA-125:K)
• Flash memory: 128 Mb Quad bit SPI flash memory (N25Q128A13EF840E)
• 100MHz CMOS oscillator
• High-Speed USB 2.0 interface for On-board flash programming. FT2232H Channel A is dedicated for SPI Flash /JTAG Programming. Channel B can be used for custom applications.
• Onboard voltage regulators for single power rail operation
• FPGA configuration via JTAG and USB
• Maximum IOs for user-defined purposes
• FPGA – 150 IOs, FT2232H – 8 IOs

• Product Prototype Development
• Accelerated computing integration
• Development and testing of custom embedded processors
• Signal Processing
• Communication devises development
• Educational tool for Schools and Universities
• Skoll is easy to use USB FPGA module with DDR3 SDRAM featuring Xilinx Kintex 7 FPGA. With the compact form factor and IO accessibility on industry standard 2.54mm (100mil) headers, Skoll is a great choice for embedding FPGA, DDR3 and USB in your system with ease. With Skoll, the complex parts of the design are already taken care of you so you can focus on your own application and achieve faster time to market.

• Designed for OEM Integration
• ROHS certification available
• USB, FPGA, and DDR3 in very compact form factor
• Industry standard 100mil (2.54mm) headers for IO access
• Built-in configuration system
• Single power rail operation
• Up to 150 user IOs
• Length matched differential IO pairs
• XoBus-Lite compatible
• Documentation, Reference Designs, and KB articles

Approx. Rs 19,116 / PieceGet Latest Price

Saturn is an easy to use FPGA Development board featuring Xilinx Spartan-6 FPGA. Saturn is designed to be suitable for a wide variety of applications such as OEM integration,  Prototyping, Experimenting and learning system design with FPGAs etc.. This development board features Xilinx XC6SLX series FPGA with FTDI’s FT2232H Dual-Channel USB device. The high speed USB 2.0 interface provides fast and easy configuration download to the on-board SPI flash. No programmer or special downloader cable is needed to download the bit stream to the board.

Features:

• FPGA: Spartan-6 LX45 in CSG324 package (other variations available, please contact us for details)
• DDR: 166MHz 512Mb LPDDR
• Flash memory: 128 Mb SPI flash memory
• 100MHz CMOS oscillator
• High Speed USB 2.0 interface for On-board flash programming
• FT2232H Channel A is dedicated for SPI Flash Programming. Channel B can be used for custom applications.
• On-board voltage regulators for single power rail operation
• FPGA configuration via JTAG and USB
  • XC6SLX16 – 150 IOs
  • XC6SLX45 – 136 IOs
  • FT2232H – 8 IOsMaximum 158 IOs for user defined purposes

Applications:

• Product Prototype Development
• OEM Integration
• Development and testing of custom embedded processors
• Signal Processing
• Communication devices development
• Educational tool for Schools and Universities

Saturn is an easy to use USB FPGA module with DDR SDRAM featuring Xilinx Spartan-6 FPGA. With the compact form factor and IO accessibility on industry standard 2.54mm (100mil) headers, Saturn is a great choice for embedding FPGA, DDR and USB in your system with ease. With Saturn, the complex parts of the design are already taken care for you so you can focus on your own application and achieve faster time to market.

Why Saturn:

• Designed for OEM Integration
• RoHS  compliant
• USB, FPGA and DDR in very compact form factor
• Industry standard 100mil (2.54mm) headers for IO access
• Built in configuration system
• Single power rail operation
• Up to 150 user IOs
• Length matched differential IO pairs
• XoBus-Lite compatible
• Documentation, Reference Designs and KB articles

Approx. Rs 69,502 / PieceGet Latest Price

Zed Board is a low-cost development board for the Xilinx Zynq™-7000 All Programmable SOC (AP SoC). This board contains everything necessary to create a Linux, Android, Windows® or other OS/RTOS based design. Additionally, several expansion connectors expose the processing system and programmable logic I/Os for easy user access. Take advantage of the Zynq-7000 AP SoC’s tightly coupled ARM® processing system and 7 series programmable logic to create unique and powerful designs with the Zed Board. The Zed Board kit is supported by the community website where users can collaborate with other engineers also working on Zynq designs.

Kit Includes:

• Avnet Zed Board 7020 baseboard
• 12 V AC/DC power supply
• 4 GB SD Card
• Micro-USB cable
• USB Adapter: Male Micro-B to Female Standard-A
• Getting Started Guide
• ISE® Web PACK™ with device-locked Chip Scope license

Features:

• Zynq-7000 AP SoC XC7Z020-CLG484
• Dual-core ARM Cortex A9

Memory:

• 512 MB DDR3
• 256 Mb Quad-SPI Flash
• 4 GB SD card
• On-board USB-JTAG Programming
• 10/100/1000 Ethernet
• USB OTG 2.0 and USB-UART
• PS & PL I/O expansion (FMC, Pmod™, XADC)
• Multiple displays (1080p HDMI, 8-bit VGA, 128 x 32 OLED)
• I2S Audio CODEC

Target Applications:

• Video processing
• Motor control
• Software acceleration
• Linux/Android/RTOS development
• Embedded ARM® processing
• General Zynq™-7000 AP SoC prototyping

Additional Information:

• Item Code: ZedBoard-Zynq-7000

Approx. Rs 7,552 / UnitGet Latest Price